

An IP rating, defined under IEC 60529, indicates the degree of protection an enclosure provides against the ingress of solid objects and water.
The rating consists of the letters IP followed by two digits.
Each digit represents a different type of protection:
For example, in an IP65-rated enclosure, the first digit 6 indicates dust-tight protection, while the second digit 5 indicates protection against water jets.
This distinction is important because outdoor network racks may be installed in environments with different levels of dust, moisture and water exposure.
An IP55-rated enclosure provides protection against dust and water jets.
Its two digits represent:
First digit – 5: Dust-protected
The enclosure is protected against dust ingress to a level where any permitted ingress should not interfere with satisfactory operation or safety. It is not completely dust-tight.
Second digit – 5: Protection against water jets
The enclosure is protected against water jets projected from a nozzle from different directions under the specified test conditions.
IP55 can be considered for outdoor networking installations where the expected dust and water exposure is compatible with this level of protection.
Potential applications include:
The actual suitability depends on the site's exposure conditions and the enclosure's installation requirements.
An IP65-rated enclosure provides a higher level of protection against dust ingress while maintaining the same water-jet protection level as IP55.
Its two digits represent:
First digit – 6: Dust-tight
The enclosure is designed to prevent dust ingress under the specified test conditions.
Second digit – 5: Protection against water jets
Like IP55, an IP65-rated enclosure is protected against water jets from different directions under the specified test conditions.
IP65 may be worth considering for installations where dust exposure is a more significant concern.
Potential applications include:
However, IP65 does not mean that an enclosure is suitable for immersion in water or every form of high-pressure cleaning.
The main difference between these ratings is their protection against dust.
Both ratings have the same second digit, meaning both provide level 5 protection against water jets.
IP55 provides dust protection, but limited dust ingress may occur under the specified test conditions.
IP65 provides dust-tight protection.
For installations in environments with significant dust exposure, the difference can influence enclosure selection.
Both IP55 and IP65 provide protection against water jets from different directions under the specified test conditions.
Neither rating should be interpreted as protection against temporary or prolonged immersion.
IP55 may be suitable for outdoor locations where the expected dust and water exposure can be addressed by that rating.
IP65 may be more appropriate where stronger protection against dust ingress is required.
The choice should be based on the actual environment rather than assuming that the highest available rating is always necessary.
The right outdoor rack depends on where it will be installed and what equipment it needs to protect.
Commercial properties may have outdoor networking equipment installed near entrances, parking areas, security cabins and external walls.
The enclosure should be selected according to its exposure to dust, rain and other environmental conditions.
An IP55 or IP65 configuration may be considered depending on the installation requirements.
Industrial environments can involve higher levels of airborne dust, production-related particles and other external contaminants.
Where dust exposure is significant, an IP65-rated enclosure may be worth considering because of its dust-tight protection.
However, the complete installation must also account for temperature, ventilation, equipment heat generation and maintenance access.
Outdoor surveillance networks may involve switches, power connections and other networking equipment positioned near camera locations.
The enclosure should be suitable for the camera network's installation environment and the equipment being housed.
For additional guidance on cable selection, read CAT6 Cable for CCTV Installation: How to Choose the Right Cable for IP Cameras.
Remote network installations may be located in areas with limited maintenance access.
In these situations, enclosure protection, cable entry, mounting arrangements and equipment accessibility should all be considered before selecting the rack.
An IP rating is an important specification, but it does not describe every aspect of an outdoor enclosure's performance.
Before selecting a network rack, consider the following additional factors.
The enclosure material should be suitable for the installation environment.
Depending on the application, consider the enclosure's construction, surface finish, corrosion resistance and overall durability.
For installations in industrial or coastal environments, environmental exposure should be assessed carefully.
Networking equipment generates heat during operation.
An outdoor enclosure may experience additional temperature changes because of direct sunlight and surrounding environmental conditions.
The equipment's operating temperature requirements and the enclosure's thermal characteristics should be evaluated together.
Ventilation arrangements must also be compatible with the required ingress protection. Adding an unsuitable opening or fan arrangement can affect the enclosure's protection level.
Outdoor network racks need suitable cable-entry arrangements.
Check how Ethernet cables, power connections and other wiring will enter the enclosure.
Cable glands and entry accessories should be appropriate for the enclosure and installation conditions so that the required protection is maintained.
Outdoor racks may need to be mounted on walls, poles or other supporting structures.
The mounting arrangement should be suitable for the enclosure's dimensions, loaded weight and installation location.
Also consider accessibility for maintenance and servicing.
Outdoor networking equipment may be installed in locations accessible to employees, visitors or the public.
A lockable enclosure can help restrict unauthorised access to networking devices and connections.
Check the locking arrangement and access requirements before purchasing.
IP65 is often described as waterproof in general product discussions, but it is more accurate to describe it as dust-tight and protected against water jets under specified test conditions.
It does not indicate that the enclosure can be submerged in water.
Different water-protection levels represent different test conditions.
For example:
The letter X means that the relevant digit has not been specified.
Therefore, an IP65 outdoor rack should not automatically be selected for locations where flooding, immersion or high-pressure cleaning is expected.
The selection process should begin with the actual installation environment.
Determine whether the enclosure will be installed in a relatively clean outdoor location or an environment with significant airborne dust.
If dust ingress is a major concern, IP65 may be the more appropriate rating to evaluate.
Identify whether the enclosure may encounter rain, splashing water or water jets during cleaning.
Confirm that the selected rating matches the expected exposure.
List the equipment that needs to be installed inside the rack.
This may include network switches, routers, PoE equipment, power supplies and other networking devices.
Confirm that the enclosure provides sufficient space for the equipment, cable connections and maintenance access.
Evaluate the operating temperature requirements of the equipment and how heat will be managed inside the enclosure.
Check that doors, seals, cable glands, mounting arrangements and accessories are compatible with the required protection rating.
The enclosure's stated IP rating should apply to the assembled configuration under its specified installation conditions.
Elixir Network offers outdoor rack solutions for networking, telecom, CCTV and industrial infrastructure applications.
Its Outdoor Racks category includes IP55 and IP65 configurations designed for different outdoor networking requirements.
For installations requiring a compact enclosure, Elixir also offers the IP55 Outdoor Rack, with configurations ranging from 4U to 15U.
The product is designed for wall- and pole-mounted applications and includes features intended for outdoor network equipment installations.
When selecting a configuration, buyers should review the product specifications, available dimensions, mounting requirements and suitability for the intended environment.
For larger installations, Elixir also offers Floor Mount Racks and Wall Mount Racks for indoor networking infrastructure.
An IP65 rating does not automatically mean that an enclosure is suitable for every outdoor or industrial environment. Temperature, corrosion, impact and installation conditions must also be considered.
IP55 provides protection against dust and water jets under specified conditions. It may be suitable for certain outdoor installations depending on the exposure.
IP65 does not provide an immersion rating. If flooding or immersion is possible, evaluate the required protection separately.
An enclosure's protection can be compromised if cable glands, seals or entry arrangements are unsuitable.
Outdoor network equipment can generate significant heat. Consider the equipment load and thermal management requirements before selecting the enclosure.
The rack should accommodate the equipment, connectors, cables and maintenance requirements comfortably.
The main difference is dust protection. IP55 is dust-protected, while IP65 is dust-tight. Both provide level 5 protection against water jets.
IP65 provides a higher level of protection against dust ingress. However, the appropriate rating depends on the installation environment. IP65 is not automatically necessary for every outdoor application.
IP55 can be suitable for outdoor installations where its dust and water protection levels meet the environmental requirements. The complete enclosure and installation should be evaluated before selection.
IP65 provides protection against water jets under specified test conditions. However, suitability for a particular installation depends on enclosure construction, correct installation, cable entries and exposure conditions.
Not in every sense of the word. IP65 means dust-tight and protected against water jets. It does not indicate suitability for immersion in water.
The appropriate rating depends on the industrial environment. IP65 may be worth considering where dust ingress is a significant concern, while other environmental factors such as heat, corrosion and physical impact must also be evaluated.
Yes. Certain outdoor network racks are designed for wall mounting, while others may support pole mounting. Check the manufacturer's mounting specifications and the suitability of the supporting structure.
Depending on its dimensions and specifications, an outdoor network rack may accommodate network switches, routers, PoE equipment, power supplies and other compatible networking devices.
Choosing between IP55 and IP65 outdoor network racks starts with understanding the environment in which the enclosure will operate.
IP55 offers dust protection and protection against water jets, while IP65 provides dust-tight protection alongside the same level of water-jet protection.
For industrial facilities, CCTV installations, commercial buildings and outdoor telecom infrastructure, the right choice depends on dust exposure, water exposure, equipment requirements, mounting arrangements and thermal management.
Elixir Network offers Outdoor Network Racks, including IP55 and IP65 configurations, alongside Wall Mount Racks, Floor Mount Racks and networking accessories.
Selecting an enclosure according to the actual installation requirements helps create a more suitable and maintainable outdoor networking setup.

As a member of Debut House, you’ll get access to a large variety of resources and networking opportunities.
Suspendisse varius enim in eros elemen tum tristique. Duis cursus, mi quis vive rra ornare, eros dolor interdum nulla.
Debut House members have access to engage with their industry's top pros and sharpen their creative skills.
Debut House members have access to engage with their industry's top pros and sharpen their creative skills.
Debut House members have access to engage with their industry's top pros and sharpen their creative skills.